When your plumbing emergencies are urgent, like a flooded bathroom after a storm or when a pipe bursts in the middle of the night or on a holiday weekend, you can’t wait until normal business hours. You need to call a 24-hour Plumbers Services in Dodson TX.
Before calling, shut off the water main to the affected area. If the pipes are exposed, apply heat to thaw them (but be careful not to use kerosene heaters or open flame devices).
Frozen Pipes
In the winter, frozen pipes can be especially devastating. They can burst, causing water to flood your home and cause serious damage. The best way to prevent frozen pipes is by keeping your home warm and making sure to check for signs of a frozen pipe regularly.
If you turn on a faucet and only a trickle of water comes out, that’s one of the most common signs of a frozen pipe. If you notice this issue, it’s important to contact a Plumbers Services in Dodson TX right away so that they can diagnose the problem and fix it before the pipe bursts.
You can also try to thaw frozen pipes by applying heat. You can use a hair dryer or heat lamp to apply heat slowly to the frozen section of pipe. Start by warming the pipe close to the faucet, then work toward the coldest section of the pipe. You can also wrap your pipes in heating tape, which is available at most hardware stores.
It’s also important to turn off your water supply when you suspect a frozen pipe. You can shut off your water by turning on the main valve at the water meter or where the city water line connects to your house. Make sure to turn off the water before trying to thaw your pipe so that you don’t accidentally cause damage to your home.
Burst Pipes
A burst pipe is a plumbing emergency that needs to be dealt with immediately. It can cause extensive water damage in your home if left unchecked. In addition, the water leaking from a burst pipe can lead to mold growth and other problems. A plumber will need to fix the broken pipe and repair any water damage that it caused.
You can prevent a burst pipe from happening by keeping an eye out for any signs of trouble. These include changes in your water pressure, obvious puddles of water in your home, ceiling stains, walls that are damp or discolored, strange smells coming from your faucets, and more. If you notice any of these issues, call an emergency plumber right away.
One of the most common reasons that a pipe bursts is due to a clog. When water pipes are clogged, they cannot flow properly and this can cause excess pressure in the pipes. This pressure may eventually be too much for the pipe to handle, causing it to burst.
To avoid this problem, you should always be vigilant about what goes down your drains and only use reputable plumbing companies for services like drain cleaning or AC tune-ups. You should also make sure that your home is well-insulated and insulate any cold pipes. It is also a good idea to install freeze protection valves on any exposed outdoor pipes.
Sewer Line Blockage
Your home’s sewer line is a vital and yet overlooked part of your plumbing. The line transports waste and wastewater to the municipal sewer drain system or, for septic systems, your onsite sewage tank. If the line becomes blocked, your entire plumbing system will cease to function.
You might notice that multiple sinks and toilets are draining slowly or not at all, which is a clear sign of a clogged sewer line. You should also watch out for bad odors. Grease is one of the most common culprits, which can clog the line just like it clogs your arteries. In most cases, a plumber will need to hydro jet or snake the line in order to fully clear the blockage.
While most homeowners have dealt with a clogged toilet or drain, it’s much more serious when the entire household’s waste and water begins to back up into the sinks, showers, and bathtubs. If this isn’t addressed immediately, you could be knee-deep in raw sewage by the end of the day.
Most of the time, a clogged sewer line is out of the homeowner’s control, as it can be caused by tree roots latching onto the line or a sagging pipe due to ground and soil conditions. Occasionally, the line can even break if it’s made of older clay or has connections that are not tight enough.
No Water
When a water problem arises that limits your ability to use fixtures or causes damage to your home, it is often considered an emergency. However, not all plumbing problems require the services of a 24-hour plumber. Many can be resolved on a do-it-yourself basis, such as cleaning your showerhead or checking the water meter valve. Others, like a burst pipe or major leak, need to be addressed immediately.
The first thing you should do if your water stops flowing is to check other taps in the house. It may be that the issue is localized to one area of the household or, more likely, in your water meter. You can also call your water department to see if they are aware of any issues in your area.
If you still find no water, you should turn off the water supply to your house by closing any valves near where you suspect a leak or, if that fails, you should shut off the main water supply. This will prevent further water damage from occurring and give you time to call for a plumber.
It’s also important to note that if your water is brown or yellow, this can be a sign of sewage or other contaminants entering the water supply. This is a true plumbing emergency and must be dealt with as soon as possible to protect your health and safety.
